Licensed installation of the Tesla Wall Connector and NEMA 14-50 outlets for your Model 3, Y, S, or X — wired to City of Austin code and set up to qualify for the Austin Energy rebate of up to $1,200. Searches for Tesla charger installation in Austin are up roughly 900% year over year. Get a same-day quote.
Get a free quote or Get a free quote
- Licensed & insured Texas electricians
- Wall Connector + Mobile Connector outlets
- Power sharing for two Teslas
- Permit, inspection & rebate paperwork handled
Tesla Wall Connector installation
Austin is Tesla’s home market, and the Wall Connector is the cleanest home-charging setup for it — up to 44 miles of range per hour, hardwired, with a flush look on the garage wall. We handle the load calculation, the circuit (typically 60A), the mount, and the City of Austin permit and inspection. Because the Wall Connector is UL-listed and Power Partner℠ compatible, the install qualifies for the top Austin Energy rebate tier of $1,200 when you’re in Austin Energy territory.
NEMA 14-50 outlet vs. hardwired Wall Connector
You’ve got two common paths for a Tesla at home in Austin:
- NEMA 14-50 outlet — works with the Tesla Mobile Connector, lower upfront cost, charges up to ~30 miles/hour on a 50A circuit. Good if you want flexibility or rent.
- Hardwired Wall Connector — faster (up to 44 mi/hr), permanent, weatherproof for outdoor mounts, and supports power sharing. Best for owners.
We’ll tell you straight which one fits your panel, your parking, and your rebate — not just upsell the bigger job. Compare Level 2 charger options →
Charging two Teslas? Power sharing.
Plenty of Austin households run two EVs. Rather than pulling two expensive 60A circuits, we can wire multiple Wall Connectors on a shared circuit with power sharing — both cars charge overnight, no panel overload. We size it during the load calculation.
Do you need a panel upgrade for a Tesla charger?
A 60A Wall Connector circuit is a meaningful load. Newer Austin homes usually have room; older homes in Hyde Park, Travis Heights, or Allandale on 100A service may need a panel upgrade or a load-management device. We run the numbers before quoting. More on panel upgrades →
Get a Tesla charger installation quote
Tell us your model, your garage, and your panel — we’ll quote a flat rate and your estimated rebate. We install Tesla-brand equipment; we are an independent electrical contractor and are not affiliated with or endorsed by Tesla, Inc.
We respond fast — usually the same day.
Tesla charger FAQ
How much does Tesla Wall Connector installation cost in Austin?
Most installs run $500–$2,000 before the Austin Energy rebate, depending on the circuit run and panel capacity. The rebate covers 50% up to $1,200, so net cost is often half.
Can I install the Tesla Wall Connector myself?
The Wall Connector requires a 240V circuit and, when hardwired in Austin, a permit and inspection. A DIY install also voids the Austin Energy rebate, which requires a licensed electrician. We recommend a professional install.
Does a Tesla charger install qualify for the $1,200 rebate?
Yes, in Austin Energy territory — the Wall Connector is listed and Power Partner compatible, which is the requirement for the top rebate tier.
How long does it take?
A typical Wall Connector install is 2–4 hours. Add time for a panel upgrade or a long conduit run.