Get matched with a licensed Texas electrical contractor for Tesla Wall Connector and NEMA 14-50 installation for your Model 3, Y, S, or X — wired to City of Austin code. If Austin Energy is your utility, ask how the rebate of up to $500 on the charger applies to you.
Get a free quote See the Austin Energy rebate
- Matched with licensed, insured Texas electricians
- Wall Connector + Mobile Connector outlets
- Power sharing for two Teslas
- Permit, inspection & rebate guidance
Tesla Wall Connector installation
Austin is Tesla’s home market, and the Wall Connector is the cleanest home-charging setup for it — up to 44 miles of range per hour, hardwired, with a flush look on the garage wall. The contractor we match you with handles the load calculation, the circuit (typically 60A), the mount, and the City of Austin permit and inspection. The Wall Connector is UL-listed; whether it qualifies for the Austin Energy rebate (up to $500 on the charger) depends on Power Partner EV enrollment and your utility.
NEMA 14-50 outlet vs. hardwired Wall Connector
You’ve got two common paths for a Tesla at home in Austin:
- NEMA 14-50 outlet — works with the Tesla Mobile Connector, lower upfront cost, charges up to ~30 miles/hour on a 50A circuit. Good if you want flexibility or rent.
- Hardwired Wall Connector — faster (up to 44 mi/hr), permanent, weatherproof for outdoor mounts, and supports power sharing. Best for owners.
Your installer will tell you straight which one fits your panel, your parking, and your rebate — not just upsell the bigger job. Compare Level 2 charger options →
Charging two Teslas? Power sharing.
Plenty of Austin households run two EVs. Rather than pulling two expensive 60A circuits, the installer can wire multiple Wall Connectors on a shared circuit with power sharing — both cars charge overnight, no panel overload. It’s sized during the load calculation.
Do you need a panel upgrade for a Tesla charger?
A 60A Wall Connector circuit is a meaningful load. Newer Austin homes usually have room; older homes in Hyde Park, Travis Heights, or Allandale on 100A service may need a panel upgrade or a load-management device. Your installer runs the numbers before quoting. More on panel upgrades →
Get a Tesla charger installation quote
Tell us your model, your garage, and your panel — we’ll match you with a licensed contractor who provides the quote and can explain your estimated rebate. ATX EV Charging is an independent referral service and is not affiliated with or endorsed by Tesla, Inc.
ATX EV Charging is a free referral service, not an electrical contractor. We don’t perform electrical work. Requests are sent to an independent, licensed Texas electrical contractor, who provides the quote and does the work. We may be compensated by the contractors we refer to.
We aim to get back to you the same business day.
Tesla charger FAQ
How much does Tesla Wall Connector installation cost in Austin?
Most installs run $500–$2,000 before any rebate, depending on the circuit run and panel capacity. If Austin Energy is your utility and the charger qualifies, its rebate returns up to $500 on the charger itself.
Can I install the Tesla Wall Connector myself?
The Wall Connector requires a 240V circuit and, when hardwired in Austin, a permit and inspection under local code. The Austin Energy rebate also requires a code-compliant, UL-listed install. Most owners hire a licensed pro.
Does a Tesla charger install qualify for the Austin Energy rebate?
It can, in Austin Energy territory — the rebate is 50% of the charger’s purchase price up to $500, for a Power Partner EV-compatible charger with enrollment. We’ll help you confirm.
How long does it take?
A typical Wall Connector install is 2–4 hours. Add time for a panel upgrade or a long conduit run.