Get matched with a licensed Texas electrical contractor for any UL-listed Level 2 (240V) home charger in Austin — Tesla, Wallbox, ChargePoint, Grizzl-E, Emporia, Enphase and more. Permitted and inspected, with Austin Energy rebate guidance of up to $500 on the charger.
Get a free quote See the Austin Energy rebate
- Matched with licensed, insured Texas electricians
- All UL/ETL-listed Level 2 brands
- Hardwired or NEMA 14-50 plug-in
- Permit & inspection handled by your installer
What is a Level 2 charger — and why you want one in Austin
A Level 2 charger runs on a 240V circuit, the same voltage as your dryer or oven, and adds roughly 25–35 miles of range per hour. Level 1 — the cord that came with the car, plugged into a standard 120V outlet — adds 3–4 miles per hour. In Austin’s commute reality, Level 1 simply can’t keep up with a daily driver. Level 2 means you plug in at night and wake up full, every morning.
Hardwired vs. plug-in (NEMA 14-50)
The right call depends on your situation:
- Hardwired — the charger is wired directly to the circuit. Faster (up to 48–80A depending on unit), weatherproof, cleanest look, required for the highest charge rates. Needs a City of Austin permit and inspection.
- Plug-in (NEMA 14-50) — the charger plugs into a 240V outlet. More flexible if you move or upgrade, slightly lower cost, capped around 40A. Popular for renters and lighter daily needs.
Your installer assesses your panel and parking and recommends the setup that charges fast enough without overbuilding. Installing a Tesla? See the Wall Connector page →
Which Level 2 charger should you buy?
Any UL, ETL, or cETL-listed unit can be installed. If you want the Austin Energy rebate, the charger needs to be Power Partner℠ EV compatible and enrolled. Common picks installed in Austin:
- Tesla Wall Connector — best for Tesla owners.
- Wallbox Pulsar Plus — compact, app-controlled, strong all-rounder.
- ChargePoint Home Flex — adjustable amperage, widely supported.
- Emporia / Enphase — value and solar-integration options.
Bought your charger already? It can be installed. Haven’t yet? We’ll point you toward one that fits your car and, if you want the rebate, qualifies for Power Partner EV. See rebate eligibility details →
Do you need a panel upgrade?
A Level 2 circuit pulls 40–60A. Many Austin homes have the capacity; older homes on 100A service may not. Your installer runs a load calculation first — sometimes the answer is a load-management device instead of a full panel upgrade, which saves you money. Panel upgrades for EV charging →
Get a Level 2 installation quote
Tell us your charger (or that you need a recommendation), your panel, and your address. We’ll match you with a licensed contractor who provides the quote and your estimated rebate.
ATX EV Charging is a free referral service, not an electrical contractor. We don’t perform electrical work. Requests are sent to an independent, licensed Texas electrical contractor, who provides the quote and does the work. We may be compensated by the contractors we refer to.
We aim to get back to you the same business day.
Level 2 charger FAQ
How much does Level 2 installation cost in Austin?
Typically $500–$2,000 before any rebate, driven mostly by the distance from your panel and whether walls need to be opened. If Austin Energy is your utility and your charger qualifies, its rebate returns up to $500 on the charger.
Can I use my dryer outlet?
Sometimes, but it’s rarely ideal — sharing the circuit limits charge speed and can trip breakers. A dedicated circuit is usually the better call.
Hardwired or plug-in?
Hardwired charges faster and needs a permit and inspection; plug-in is more flexible. Your installer recommends based on your charge-speed needs and panel.
How long does it take?
Most Level 2 installs are 2–4 hours. Panel work or long runs can extend to a full day.